Holders for Best Form Lenses

Fassungen für Bestformlinsen/Drawing(3k)

For the lenses with diameters of 25 mm and 40 mm holders are available. For the smaller lenses adaptor plates (25 mm outer diameter) are available which enable the mounting of the smaller lenses in the 25 mm holders. The lenses resp. adaptor plates are held by means of a threaded ring and an elastic O ring.
Sketches about these assemblies are available on request.
The holder for 25 mm lenses has an outer diameter of 35 mm and a thickness of 16 mm. It can be mounted on optical rails with posts with thread size M4. Alternatively it can be mounted in other optical construction systems on its cylindrical outer surface. MFL 025 | € 82 (1-5 pc.), € 75 (6-10 pc.)


Adapter plates for mounting smaller lenses in the holder MFL 025 (set of 2 pieces):
- for lenses 8 mm MFL 025.08 | € 27 (1-5 pc.), € 24 (6-10 pc.)
- for lenses 10 mm MFL 025.10 | € 25 (1-5 pc.), € 22 (6-10 pc.)
- for lenses 15 mm MFL 025.15 | € 25 (1-5 pc.), € 22 (6-10 pc.)
- for lenses 20 mm MFL 025.20 | € 25 (1-5 pc.), € 22 (6-10 pc.)

The holder for 40 mm lenses has an outer diameter of 70 mm and a thickness of 23 mm. It can be mounted on optical rails with posts with thread sizes of either M4, M6 or M8. Alternatively it can be mounted in optical construction systems with 4 bores threaded M3 (on a circle Ø 60 mm, on its left side) or be held by a V groove (on the outer surface, 90°, 4 mm wide), incl. M8 optical post. 
MFL 040 | € 122 (1-5 pc.), € 112 (6-10 pc.)

Shortinfo Downloads